The Anycubic Wash & Cure 3 is a dedicated post-processing station for resin 3D printing, combining alcohol-based washing and UV curing in a single compact unit. The dual-layer PP cleaning basket accommodates build platforms at two adjustable heights (100mm and 165mm), supporting LCD printers up to 7.3″, while the 3L basket capacity and 4L bucket keep IPA usage efficient. For curing, ten 405nm LEDs work alongside a flexible gooseneck light to deliver localised strengthening on fine details and hard-to-reach areas, with a maximum curing volume of 3.18L to handle larger prints in a single session. An infinite rotary knob lets you dial in a timer anywhere from 1 to 30 minutes, and touch buttons switch cleanly between wash, cure, and FlexiCure modes. At 2.7kg and 216×217×310mm, it sits neatly on any workshop bench without taking up valuable space.

Features

• Dual-mode operation — switch between washing and UV curing with touch-button controls
• Maximum cleaning volume of 165×100×180mm accommodates a wide range of resin prints
• Maximum curing volume of 3.18L for larger models in a single post-processing session
• Ten 405nm LEDs plus a flexible gooseneck light deliver uniform and localised curing
• Dual-layer PP cleaning basket with adjustable heights (100mm and 165mm) for compatibility with LCD printers up to 7.3″
• 3L cleaning basket capacity for efficient IPA usage
• Adjustable timer from 1 to 30 minutes via infinite rotary knob
• Alcohol soaking cleaning method — no specialist consumables required

Specifications

• Printing Volume:
  • Maximum Cleaning Volume: 165 x 100 x 180mm
  • Maximum Curing Volume: 3.18L
• Control and Print Methods: Touch Buttons
• Touchscreen: Touch Buttons
• Cleaning Method: Alcohol Soaking
• Time Setting Range: 1–30 mins
• Cleaning Basket Capacity: 3L
• UV Light Configuration: 10pcs*405nm LEDs + Gooseneck Light
• Rated Power: 36W
• Warranty: 12 Months
• Machine Dimensions: 21.6 x 21.7 x 31 cm
• Machine Weight: 2700g

What’s in the Box

• Anycubic Wash & Cure 3 x1
• Washing Bucket x1
• Washing Basket x1
• Hex Key Set x1
• Rack Bar x1
• Gooseneck Light x1
• Power Adapter x1
• Curing Table x1
• Instruction Manual x1

See Manufacturers site or Check out more from Chaos

The post Anycubic Wash and Cure 3 appeared first on Chaos Computers.

The Anycubic Wash & Cure 3 Max is built for serious resin 3D printing enthusiasts, studios, and professionals who need a reliable, high-capacity post-processing station. With a maximum wash capacity of 305 × 165 × 300 mm and a cleaning container capacity of 20L, it handles large and batch prints with ease — making it compatible with the Photon M3 Max, Photon Mono M7 Max, and most mainstream LCD printers with a build volume of 13.6 inches or smaller. One-click automation drives the full wash and cure cycle, eliminating messy manual handling, while three flexible modes — Auto (13–42.5 mins), Wash (10–39.5 mins), and Cure (0.5–30 mins) — let you dial in the process to suit each print. A 360° rotating curing platform powered by 20 × 405nm LEDs plus a gooseneck light delivers a maximum curing power density of 25,000 μW/cm² at 18 cm irradiation distance for a thorough, even cure. Full-process intelligent monitoring alerts you to open covers, low voltage, blockages, and liquid inflow issues before they become problems. The result is a cleaner, faster, and more controlled post-processing workflow from first wash to finished print.

Features

• Ultra-large 15.1L maximum curing volume accommodates large prints and batch runs from most LCD printers up to 13.6 inches
• Maximum wash dimensions of 305 × 165 × 300 mm — compatible with Photon M3 Max, Photon Mono M7 Max, and most mainstream LCD printers
• One-click fully automated washing and curing cycle keeps hands clean and the workflow simple
• Three customisable modes: Auto (13–42.5 mins), Wash (10–39.5 mins), and Cure (0.5–30 mins) for flexible post-processing
• 360° spray cleaning combined with bottom-section immersion for thorough, IPA-efficient cleaning
• Curing platform with 20 × 405nm LEDs plus gooseneck light, reaching up to 25,000 μW/cm² power density at 18 cm
• Full-process intelligent monitoring with error alerts for open cover, no liquid inflow, outlet blockage, and low voltage
• Transparent flip-open lid and minimalistic touch-button control panel for easy access and operation

Specifications

• Maximum Curing Volume: 15.1L
• Maximum Cleaning Volume: 305*165*300mm
• Cleaning Method: Alcohol Soaking + Spray Rinse
• Time Setting Range: 13-42.5 Mins (Auto mode), 10-39.5 Mins (Wash mode), 0.5-30 Mins (Cure mode)
• Cleaning Container Capacity: 20L
• UV Light Configuration: 20pcs*405nm LEDs + Gooseneck Light
• Power Supply: 120W
• Control Interface: Touch Buttons
• Compatible Printer Models:
  • Photon M3 Max
  • Photon Mono M7 Max
  • Most mainstream LCD printers with build volume 13.6 inches or smaller
• Product Dimensions: 43.4 × 43.4 × 55.6 cm
• Product Weight: 13500g

What’s in the Box

• Anycubic Wash & Cure 3 Max Tray x1
• Detergent Drum x1
• Waste Liquid Drum x1
• Clean Liquid Drum x1
• Water Tubes x4
• Wrench Set x1
• Power Adapter and Power Cord x1
• User Manual x1

See Manufacturers site or Check out more from Chaos

The post Anycubic Wash and Cure 3 Max appeared first on Chaos Computers.

Quick Specs

• Achieve stunning detail with a 10.1-inch 14K LCD screen and 0.02 mm Z-axis accuracy for sharp, smooth prints every time.
• Enjoy a generous 223 × 126 × 230 mm build volume — large enough for detailed figurines, technical prototypes, and functional parts.
• Connect your way with built-in USB, Wi-Fi, and Ethernet connectivity for flexible file transfer and remote monitoring.
• Experience consistent results print after print, thanks to industrial-grade linear guides and a ball screw Z-axis drive.
• Get started without the hassle — the automatic levelling system means the Photon P1 is ready to print almost immediately after setup.

Professional-Grade Resin Printing for Makers Who Mean Business

The Anycubic Photon P1 is a high-performance MSLA resin 3D printer designed for makers, designers, and engineers who refuse to compromise on detail. Built around a 10.1-inch 14K LCD screen, an industrial-grade Z-axis drive, and a comprehensive suite of smart features, it delivers the kind of print quality and repeatability usually reserved for professional studios — in a machine built for everyday use.

Sharpness You Can See, Accuracy You Can Measure

The 14K resolution LCD panel produces crisp, highly detailed prints with fine surface texture and clean edges. On the Z-axis, a ball screw drive paired with industrial-grade linear guides achieves 0.02 mm accuracy, minimising layer lines and ensuring smooth transitions between layers. Whether you’re printing intricate miniatures, precision mechanical components, or architectural scale models, the Photon P1 reproduces your designs faithfully.

Tired of Printers That Need Constant Babysitting?

The Photon P1 takes setup frustration off the table with its automatic levelling system, getting you from unboxing to first print with minimal manual intervention. Smart monitoring keeps an eye on key stages of the print process, helping to catch errors early and prevent wasted resin. With quiet operation rated at under 45 dB, you can run the printer comfortably in a home studio, workshop, or office without the noise becoming a nuisance.

Stay Connected, Stay in Control

Flexibility is built into the Photon P1’s connectivity options. Transfer files via USB for straightforward standalone operation, connect over Wi-Fi (2.4 GHz) for wireless convenience, or plug into your network via Ethernet for a stable, wired connection. The printer pairs with Anycubic Photon Workshop slicer software, giving you a familiar, capable environment to prepare and send your models. With a build volume of 223 × 126 × 230 mm and a robust 13.6 kg chassis that stays planted during operation, the Photon P1 is ready for serious, sustained creative work.

Features

• 10.1-inch 14K LCD screen delivers high-resolution output with fine surface detail and sharp edges.
• Industrial-grade linear guides and ball screw Z-axis drive provide 0.02 mm accuracy and consistent layer-to-layer stability.
• Automatic levelling system eliminates manual calibration — ready to print with minimal setup.
• Supports UV resin with adjustable layer thickness from 0.02 mm to 0.15 mm for fine or faster prints.
• Tri-mode connectivity: USB, Wi-Fi (2.4 GHz), and Ethernet (LAN) for flexible file transfer and control.
• Whisper-quiet operation at under 45 dB — suitable for home studios and office environments.
• Compatible with Anycubic Photon Workshop slicer software.
• Broad power input (100–120 V / 200–240 V) for global compatibility.

Specifications

• Printer Technology: Resin (LCD/MSLA)
• Printing Volume: 223 × 126 × 230 mm
• Print Layer Thickness: 0.02 – 0.15 mm
• Supporting Filaments: UV Resin
• Construction: Industrial-grade linear guides and ball screw for Z-axis stability
• Motion System Z-axis: Ball screw with industrial-grade linear guides, 0.02 mm accuracy
• Auto-Leveling: Yes – automatic levelling system
• Control and Print Methods: USB, Wi-Fi, Ethernet/LAN
• Touchscreen: 10.1″ 14K screen
• Noise Level: Under 45 dB
• Slicer Software: Anycubic Photon Workshop
• Connectivity: USB, Wi-Fi (WLAN), LAN (Ethernet)
• Wi-Fi Spec: 2.4 GHz (2.400–2.4835 GHz)
• Machine Dimensions: 366 × 338 × 539 mm
• Machine Weight: 13.6 kg
• Power Input: 100–120 V / 200–240 V
• Rated Power: 215 W
• Warranty: 12 Months

What’s in the Box

• Anycubic Photon P1 3D Printer x1
• Build platform x1
• Resin tray x1
• Resin funnel x1
• Scraper x2
• Set of Allen wrenches x1
• Wet wipes x1
• Protective accessories x1
• USB flash drive x1
• Power cord x1
• User manual x1

See Manufacturers site or Check out more from Chaos

The post Anycubic Photon P1 3D Printer appeared first on Chaos Computers.

The Anycubic Photon Mono M7 Pro is a next-generation resin 3D printer built for makers who refuse to compromise on quality. At its heart sits a crisp 10.1-inch 14K monochrome LCD, resolving fine features down to a razor-sharp 16.8µm on the X/Y axis – so every miniature, prototype and precision part comes off the plate looking exactly as you imagined it.

Speed keeps pace with the detail. Paired with High-Speed Resin, the M7 Pro reaches printing speeds of up to 170mm/h, turning what used to be an overnight wait into a same-session result. And thanks to Auto-Adaptive Technology with dynamic temperature control, the printer keeps your resin in its ideal working range for consistent, repeatable prints – batch after batch.

It’s designed to work smarter, not harder. Auto Resin Refill and Withdrawal tops up the vat and draws resin back automatically, so longer prints run unattended without the mess or the guesswork. A generous 223 × 126 × 230mm (6.5L) build volume gives you room for large single models or a full plate of miniatures, while a laser-engraved build plate, dual linear Z-axis rails with 10µm precision and a leveling-free design mean strong adhesion and reliable results straight out of the box.

Versatile by nature, the M7 Pro handles high-speed, water-washable, standard, ABS-like and plant-based resins, and connects your way over USB, Wi-Fi or LAN. With Photon Workshop and Chitubox support, a responsive 4.3-inch touchscreen and full Anycubic App integration, it’s a resin 3D printer that fits effortlessly into your workflow – whether you’re a hobbyist, a tabletop enthusiast or a professional chasing production-grade accuracy.

The Anycubic Photon Mono M7 Pro – precision, speed and effortless printing, ready for whatever you create next.

Features

• 10.1-inch 14K mono LCD screen for high-resolution resin printing
• 170mm/h with High-speed Resin
• Designed for detailed miniatures, prototypes, and precision parts
• Auto-Adaptive Technology Control Heating
• Auto Resin Refill, Withdrawal
• Resin-based photopolymer printing process

Specifications

• Printing Volume: 223 x 126 x 230mm³ (6.5L)
• Printing Speed: Max Speed ≤130mm/h; Standard Resin (0.1mm): ≤130mm/h; High-Speed Resin (0.1mm): ≤170mm/h
• Layer Height Range: 0.01 – 0.15mm
• X/Y Axis Resolution: 16.8 × 24.8μm
• Light Source: COB Light Source+ Fresnel lens + Light Uniformity Algorithm
• Light Intensity: 5500 ±10% μW/cm²
• Material Compatibility: High-speed, Water-washable, Standard, ABS-like, and Plant-based Resins, etc
• Build Platform: Laser-engraved Build Plate
• Z-axis: Dual Linear Rails with 10 μm Precision
• Release film: Improved ACF Film
• Resin Vat: ≤1L
• Machine Leveling: Leveling-free
• Power Loss Resume: Not Supported
• Power Supply: 240W
• Protection Film: Replaceable Scratch-resistant Film
• Resin Auto-fill Unit: Supported
• Dynamic Temperature Control Resin Vat: Supported
• Slicing Software: Photon Workshop, Chitubox, Lychee Slicer (Scheduled)
• File Transfer: USB/Wi-Fi/LAN
• Hinged Cover: –
• Operating Screen: 4.3″ Touch-Control
• Air Purifier: Optional Accessory
• LCD Screen: 10.1-inch Monochrome LCD, 14K Resolution
• Anycubic App: Supported
• Multilingual Support: EN / CN / DE / FR / IT / ES / RU / JP
• Machine Weight: 12 800g
• Product Dimensions: 312 x 315 x 520mm³

What’s in the Box

• Anycubic Photon Mono M7 Pro 10.1″ 14K Resin 3D Printer x1
• Print Platform x1
• Resin Vat x1
• Wi-Fi Antenna x1
• Hex Key Set x1
• Protective Equipment x1
• Filter x5
• Scrapers x2
• Leveling Paper x1
• USB Drive x1
• Power Cord x1
• Screen Protector Kit x1
• Auto-fill Unit x1
• User Manual x1

See Manufacturers site or Check out more from Chaos

The post Anycubic Photon Mono M7 Pro 10.1″ 14K Resin 3D Printer appeared first on Chaos Computers.

The Anycubic Photon Mono 4 is an MSLA resin 3D printer designed for makers, hobbyists, and creators who want high-detail output without stepping up to a premium price. It prints at a layer thickness of just 0.02mm, capturing fine surface detail that filament-based printers simply cannot match, while a maximum printing speed of 70mm/h keeps your projects moving along at a respectable pace. The 7″ high-definition touchscreen makes navigating settings and monitoring jobs straightforward, reducing the learning curve for those new to resin printing. Power-loss resume means an unexpected outage won’t cost you a completed print — the Photon Mono 4 picks up right where it left off. A capable, practical entry point into precision resin printing backed by a 12-month warranty.

Features

• MSLA (LCD resin) printing technology for high-precision results
• 0.02mm minimum layer thickness for fine surface detail
• Print speeds up to 70mm/h to reduce wait times
• 7″ high-definition touchscreen for intuitive control
• Power-loss resume — automatically continues printing after a power interruption
• Compatible with UV resin consumables
• 12-month manufacturer warranty

Specifications

• Printer Technology: MSLA (Resin / LCD)
• Printing Volume: 153.4 x 87 x 165mm³
• Print Layer Thickness: 0.02mm
• Max Printing Speed: 70mm/h
• Supporting Filaments: UV Resin
• Power Loss Resume: true
• Touchscreen: 7″ High-Definition Screen
• Warranty: 12 Months

What’s in the Box

• Anycubic PHOTON Mono 4 Resin 3D Printer x1
• Print Platform x1
• Resin Vat x1
• Filter x2
• Scrapers x2
• Hex Keys x3
• USB Drive x1
• Power Cord x1
• Manual x1
• Screen Protector Kit x1
• Leveling Paper x1
• Protective Equipment x1

See Manufacturers site or Check out more from Chaos

The post Anycubic PHOTON Mono 4 Resin 3D Printer appeared first on Chaos Computers.

Quick Specs

• Print large-scale models with a generous 350×350×350mm³ build volume — ideal for ambitious, full-sized creations
• Achieve vivid multicolour results with up to 16-colour printing capability via ACE 2 Pro units
• Experience consistent, reliable prints inside a fully-enclosed CoreXY structure built for precision and stability
• Push material boundaries with a 350°C hardened steel nozzle compatible with engineering-grade and composite filaments
• Enjoy broad filament compatibility across PLA, PETG, ASA, ABS, TPU, PLA-CF, PETG-CF, and PLA Silk

Large-Format 3D Printing, Unleashed in Full Colour

The Anycubic Kobra S1 Max Combo is built for makers, designers, and engineers who refuse to be limited — by size, by colour, or by material. Combining a fully-enclosed CoreXY printer with the ACE 2 Pro automatic colour-exchange system, this combo delivers a 350×350×350mm³ build volume alongside the capability to print in up to 16 colours in a single run. Whether you’re producing functional prototypes, detailed display models, or large creative projects, the Kobra S1 Max Combo gives you the tools to do it at scale.

A Build Volume That Matches Your Ambitions

Tired of splitting large models into multiple prints just to fit your build plate? The Kobra S1 Max Combo’s 350×350×350mm³ print volume means you can take on full-scale functional parts, oversized figurines, architectural models, and more — all in a single print session. The fully-enclosed CoreXY construction keeps the motion system rigid and precise across that entire volume, so dimensional accuracy doesn’t suffer as your prints grow larger.

Up to 16 Colours, Automatically Managed

The ACE 2 Pro automatic colour exchange units included in this combo take multicolour FDM printing to a new level. With the right configuration of ACE 2 Pro units, the system supports up to 16-colour printing — letting you produce richly detailed, vibrant models without manual filament swaps. The result is creative output that genuinely reflects your designs rather than being constrained by single-material limitations.

Built for Demanding Filaments

The Kobra S1 Max Combo’s hardened steel nozzle handles far more than standard PLA. With a maximum nozzle temperature of 350°C, you can print carbon-fibre composites such as PLA-CF and PETG-CF, flexible TPU, weather-resistant ASA, and tough ABS with confidence. The fully-enclosed chamber supports the stable thermal environment that engineering-grade and composite materials demand, giving you consistent results across a wide range of applications.

Features

• 350×350×350mm³ build volume for large-scale and full-sized prints
• Up to 16-colour printing capability with ACE 2 Pro units
• Fully-enclosed CoreXY construction for rigidity and dimensional precision
• 350°C hardened steel nozzle supports composite and engineering-grade filaments
• Active chamber heating at 65°C for consistent print environment
• Compatible with PLA, PETG, ASA, ABS, TPU, PLA-CF, PETG-CF, and PLA Silk
• FDM (Fused Deposition Modelling) printing technology

Specifications

• Brand: Anycubic
• Product Name: Anycubic Kobra S1 Max Combo
• Model Number: Kobra S1 Max Combo
• Manufacturer: Anycubic
• SKU / Part Number: KSMCBK0B-O
• Printer Technology: FDM (Fused Deposition Modelling)
• Printing Volume: 350×350×350mm³
• Multicolour Printing: Up to 16-colour printing (with ACE 2 Pro units)
• Supporting Filaments: PLA, PETG, ASA, ABS, TPU, PLA-CF, PETG-CF, PLA Silk
• Nozzle Material: Hardened Steel
• Max Nozzle Temperature: 350°C
• Construction: Fully-Enclosed CoreXY
• Warranty: 12 Months

What’s in the Box

• Anycubic Kobra S1 Max – Black x1
• Anycubic ACE 2 Pro x1
• Spool Holder x1
• Signal Cable x1
• Teflon Tubes x4
• Power Cord x1
• Return Detection Module x1
• M4 Screws x2
• M2.5 Screws x2
• Cable Clip x2
• Allen Key x3
• Nozzle Cleaner x1
• Grease x1
• Nozzle Cleaning Module x1
• Nozzle Parking Pad x1
• Activated Carbon Pack x1
• Filament Samples x1
• Spool Holder Assembly x1

Why Anycubic

Anycubic has built its reputation on making professional-grade 3D printing accessible — combining hardware innovation with practical usability. From hobbyists to professional designers, Anycubic’s Kobra series brings large-format, multicolour FDM printing within reach, backed by a global support network and a commitment to continuous improvement.

See Manufacturers site or Check out more from Chaos

The post Anycubic Kobra S1 Max Combo – 3D Printer appeared first on Chaos Computers.

Quick Specs

• Print up to 16 colours simultaneously with the included ACE 2 Pro multi-material unit, expandable from a base of 4 colours
• Achieve blazing print speeds of up to 600mm/s on a rigid CoreXY motion system with 20000mm/s² acceleration
• Enjoy a generous 250mm × 250mm × 250mm build volume with fully automatic levelling — no Z-axis compensation needed
• Print with confidence using built-in AI spaghetti detection, filament runout sensing, and power-loss resume
• Control and monitor your prints from anywhere via the Anycubic App, AC Cloud, or the 4.3-inch capacitive touchscreen

Serious multicolour printing, straight out of the box

The Anycubic Kobra S1 ACE 2 Pro Combo 3D printer is a fully enclosed CoreXY 3D printer bundled with the ACE 2 Pro multi-material unit, giving makers, hobbyists, and design professionals a complete system for producing vivid multicolour prints from day one. With a base capacity of 4 colours — expandable to 16 — and a 250mm × 250mm × 250mm build volume, it is built for anyone who wants more than a single-colour machine without building a separate setup from scratch.

Speed and precision that keeps up with your creativity

The Kobra S1 uses a CoreXY construction paired with light-rail X and Y axes, a dual-gear short-range extruder, and a maximum print speed of 600mm/s at up to 20000mm/s² acceleration. Layer thickness runs from 0.08mm to 0.28mm, giving you fine detail when you need it and fast rough drafts when you do not. The standard 0.4mm brass nozzle is quick-detachable and compatible with 0.2mm, 0.6mm, and 0.8mm alternatives, while the hotend reaches up to 320°C and the heated bed reaches up to 120°C — covering PLA, PETG, ABS, ASA, and TPU with ease.

Tired of failed prints ruining your filament and your day?

The Kobra S1 ACE 2 Pro Combo 3D printer addresses the most common printing frustrations with a suite of intelligent safeguards. AI spaghetti detection monitors the chamber camera feed and can skip over problem areas before they ruin an entire job. Automatic filament detection and auto-resume handle runouts without manual intervention, and power-loss recovery picks up exactly where it left off after an unexpected outage. Fully automatic levelling with object-skip and area levelling means the printer arrives ready to print — no manual Z-axis compensation required.

Keep filament dry and prints in perfect condition

The ACE 2 Pro unit is more than a multi-material hub — it actively dries your filament during printing at temperatures up to 65°C, helping to prevent moisture-related print defects. A built-in temperature and humidity sensor monitors conditions inside the unit, while a solenoid valve expels moist air during the drying cycle. The enclosed chamber on the Kobra S1 itself houses an activated carbon air filtration system, keeping your workspace clean when printing with materials like ABS and ASA.

Full control, wherever you are

Manage every aspect of your print from the 4.3-inch capacitive touchscreen on the machine, or connect over 2.4GHz Wi-Fi to use the Anycubic App, Anycubic Slicer Next, or AC Cloud for remote monitoring and control. A built-in chamber camera supports time-lapse photography so you can review print progress at a glance. The printer runs on Kobra OS, supports multilingual setup from first boot, and is compatible with both Anycubic Slicer Next and OrcaSlicer. Quiet mode keeps noise at or below 44dB — considerate for home studios and shared workspaces.

Features

• CoreXY construction with light-rail X and Y axes delivers fast, accurate motion up to 600mm/s and 20000mm/s² acceleration
• ACE 2 Pro multi-material unit included — supports 4 colours as standard, expandable to 16 colours
• Active filament drying in the ACE 2 Pro unit up to 65°C, with integrated temperature and humidity sensing
• Fully automatic levelling with object-skip and area levelling — no manual Z-axis compensation required
• AI spaghetti detection via chamber camera with time-lapse photography support
• Filament runout detection with auto-resume, plus power-loss recovery
• Quick-detachable 0.4mm brass nozzle; compatible with 0.2mm, 0.6mm, and 0.8mm nozzles
• Quiet mode operation at ≤44dB; standard mode at ≤46dB
• Activated carbon air filtration built into the enclosed chamber
• Compatible with PLA, TPU (ACE-grade), PETG, ABS, and ASA filaments
• Control via touchscreen, Anycubic App, Anycubic Slicer Next, AC Cloud, or USB drive

Specifications

• Printer Technology: FDM (Fused Deposition Modeling)
• Printing Volume: 250mm × 250mm × 250mm
• Print Layer Thickness: 0.08 – 0.28mm
• Max Printing Speed: 600mm/s
• Acceleration: 20000mm/s²
• Multicolor Printing: Base 4 colors, expandable to 16 colors
• Supporting Filaments: PLA,TPU,PETG,ABS,ASA
• Active Drying: Supported, drying temperature up to 65°C
• Nozzle Diameter: Standard 0.4mm; supports 0.2/0.6/0.8mm expansion
• Nozzle Material: Non-all-metal, brass nozzle, quick-detachable
• Max Nozzle Temperature: 320°C
• Hotbed Max Temperature: 120°C
• Firmware: Kobra OS
• Construction: CoreXY
• Extrusion Type: Dual gear short-range extrusion
• Motion System X-axis: Light rail
• Motion System Y-axis: Light rail
• Motion System Z-axis: Single motor with three guide poles
• Auto-Leveling: Fully automatic leveling, no need for Z-axis compensation
• Power Loss Resume: true
• Filament Detection and Auto Resume: true
• AI Spaghetti Detection: true
• Object-Skip and Area Leveling: true
• Control and Print Methods: Touchscreen, Anycubic App, Anycubic Slicer Next, AC Cloud
• Touchscreen: 4.3-” capacitive touch screen
• Noise Level: ≤46dB (Standard mode); ≤44dB (Quiet mode)
• Video Monitoring: Chamber Camera (supported; time-lapse photography supported)
• Multilingual Support: Yes (multiple languages available at startup)
• Slicer Software: Anycubic Slicer Next, OrcaSlicer
• Input File Formats: .STL,.OBJ,.3mf
• Output File Formats: GCode
• Connectivity: U-DISK,AC Cloud, Anycubic Slicer Next, Wi-Fi
• Wi-Fi Spec: 2.4GHz, Working Mode: STA
• Power Input: 100-120V~ / 200-240V~
• Rated Power: 500W / 1500W
• Machine Dimensions: 40 × 41 × 49 cm
• Machine Weight: 18000g
• ACE Unit Dimensions: 36.8 × 29.1 × 23.6 cm
• ACE Unit Weight: 3700g
• Warranty: 1 Year

What’s in the Box

• Kobra S1 Printer x1
• ACE 2 Pro x1
• Spool Holder x1
• Signal Cable x1
• Filament Tube x4
• Screws M3×6 x2
• Screws M2.5×25 x2
• Grease x1
• Hex Keys 2.5mm / 2.0mm / 1.5mm x1 set
• Nozzle Cleaner x1
• Filament Sample x1
• Power Cord x2
• Activated Carbon x1
• Anti-blocking Module x1
• Nozzle Silicone Part x1
• Cable Organizer x2
• Nozzle Cleaning Module x1

Why Anycubic

Anycubic has been at the forefront of accessible 3D printing since 2015, combining engineering precision with a commitment to making advanced fabrication technology available to everyone — from first-time hobbyists to experienced makers. The Kobra S1 ACE 2 Pro Combo is a direct expression of that mission: a fully capable multicolour FDM system built to perform reliably and grow with your ambitions.

See Manufacturers site or Check out more from Chaos

The post Anycubic Kobra S1 Ace 2 Pro Combo 3D Printer appeared first on Chaos Computers.

Quick Specs

• Print at speeds up to 600 mm/s across a generous 350 × 350 × 350 mm build volume — tackle large, complex projects with confidence.
• Achieve precise, repeatable results every time with LeviQ3.0 automatic bed levelling and built-in pressure advance and flow calibration.
• Print with over a dozen filament types — from everyday PLA and PETG to engineering-grade PA, PC, and carbon-fibre composites — thanks to a 350°C hardened steel nozzle.
• Stay in control from anywhere: monitor, manage, and start prints via the Anycubic App, slicing software, or the onboard 4.3-inch capacitive touchscreen.
• Work quietly and confidently — AI spaghetti detection, filament entanglement sensing, and power-loss resume keep long prints on track without constant babysitting.

Big builds, serious speeds — without the compromise

The Anycubic Kobra S1 Max 3D Printer is built for makers, engineers, and creators who need a large-format FDM 3D printer that can keep up with ambition. With a 350 × 350 × 350 mm³ build volume and a CoreXY motion system capable of reaching 600 mm/s (recommended 300 mm/s) at accelerations up to 20,000 mm/s², it handles everything from rapid prototyping to production-scale batch runs — without sacrificing print quality.

Print more materials, solve harder problems

Tired of a 3D printer that locks you into a handful of basic filaments? The Kobra S1 Max supports thirteen filament types, spanning everyday PLA and PETG all the way to demanding engineering materials like PA, PC, PA6-CF, PC-CF/GF, and PET-CF. A hardened steel nozzle rated to 350°C and hardened steel extrusion gears handle abrasive carbon-fibre and glass-fibre composites without wearing down, while a PEI spring steel build plate (max 120°C) gives prints solid adhesion and easy release.

Set it up once, print with confidence every time

Getting the first layer right shouldn’t take an hour of fiddling. The Kobra S1 Max integrates LeviQ3.0 automatic bed levelling alongside object-skip and area levelling, so the printer compensates for any surface variation before a single line of filament is laid down. Pressure advance and flow calibration fine-tune extrusion in real time, keeping walls clean and corners sharp across the full build volume.

AI monitoring that keeps long prints on track

Unattended overnight prints carry real risk — but the Kobra S1 Max watches over your work so you don’t have to. An onboard AI spaghetti detection system flags failed prints before they waste hours of filament. Filament runout detection, filament entanglement detection, and automatic resume mean a snapped or tangled spool won’t ruin a job. Power-loss resume picks up exactly where the printer left off if the power cuts out, and the standard HD camera (720P) lets you check in remotely via the Anycubic App.

Features

• CoreXY motion system with linear rods on all three axes — speeds up to 600 mm/s with 20,000 mm/s² maximum acceleration.
• 350 × 350 × 350 mm³ build volume for large-format and batch printing.
• Hardened steel nozzle (standard 0.4 mm, expandable to 0.25 / 0.6 / 0.8 mm) rated to 350°C — compatible with abrasive filaments.
• Supports 13 filament types: PLA, PETG, PET, PLA-CF, PETG-CF, PVA, ABS, ASA, PC, PA, PA6-CF, PC-CF/GF, PET-CF.
• LeviQ3.0 auto-levelling with object-skip, area levelling, pressure advance, and flow calibration for reliable first layers.
• AI spaghetti detection, filament runout detection, filament entanglement detection, and power-loss resume for unattended printing peace of mind.
• Built-in 720P HD camera for remote monitoring via the Anycubic App.
• 4.3-inch capacitive touchscreen with Kobra OS; 10 language interfaces supported.
• Quiet operation at ≤45 dB in quiet mode; ≤48 dB in standard mode.
• PEI spring steel build plate with hotbed temperature up to 120°C.

Specifications

• Brand: Anycubic
• Product Name: Anycubic Kobra S1 Max
• Printer Technology: FDM (Fused Deposition Modelling)
• Printing Volume: 350 x 350 x 350mm³
• Max Printing Speed: Recommended 300 mm/s; Maximum 600 mm/s
• Acceleration: Recommended 10,000 mm/s²; Maximum 20,000 mm/s²
• Multicolour Printing: Sold separately
• Supporting Filaments: PLA, PETG, PET, PLA-CF, PETG-CF, PVA, ABS, ASA, PC, PA,  PA6-CF,PC-CF/GF, PET-CF
• Active Drying: Not Supported
• Nozzle Diameter: Standard 0.4 mm, Expandable to 0.25 / 0.6 / 0.8 mm
• Nozzle Material: Hardened Steel
• Max Nozzle Temperature: 350°C
• Hotbed Max Temperature: 120°C
• Hotbed Material: PEI Spring Steel Build Plate
• Firmware: Kobra OS
• Construction: CoreXY
• Extrusion Type: Short Distance Extrusion, Hardened Steel Extrusion Gears
• Motion System X-axis: Linear Rods
• Motion System Y-axis: Linear Rods
• Motion System Z-axis: Single Motor, Triple Lead Screws, Triple Linear Rods
• Auto-Leveling: LeviQ3.0 Auto-levelling
• Pressure Advance / Flow Calibration: True
• Power Loss Resume: True
• Filament Detection and Auto Resume: True
• Filament Entanglement Detection: True
• AI Spaghetti Detection: True
• Object-Skip and Area Levelling: True
• Control and Print Methods: Via Printer, Slicing Software, Anycubic APP, U Disk
• Touchscreen: 4.3″ Capacitive Touchscreen
• Noise Level: ≤48dB (Standard mode); ≤45dB (Quiet mode)
• Video Monitoring: Standard HD Camera, Supports 720P
• Multilingual Support: EN / CN / DE / FR / IT / ES / RU / JP / KO / PT
• Machine Dimensions: 502.7 × 483 × 584 mm³
• Machine Weight: 25.7 kg
• Package Weight: 31 kg
• Packaging Dimensions: 583 × 560 × 693 mm³
• Warranty: 12 Months

What’s in the Box

• Anycubic Kobra S1 Max 3D Printer x1
• Spool Holder x1
• Spool Holder Assembly x1
• M4×16 Screws x2
• Grease x1
• Power Cord x1
• Hex Keys (2.5 / 2.0 / 1.5 mm) x1 set
• Filament Samples x1
• Nozzle Cleaner x1
• Nozzle Cleaning Module x1
• Nozzle Parking Pad x1
• 0.6 mm Hardened Steel Nozzle x1
• Activated Carbon Pack x1

See Manufacturers site or Check out more from Chaos

The post Anycubic Kobra S1 MAX 3D Printer appeared first on Chaos Computers.

Quick Specs

• Print large, detailed models with a generous 250×250×250mm build volume inside a fully enclosed CoreXY chamber.
• Achieve fast, precise results with a recommended print speed of 300 mm/s and acceleration up to 10,000 mm/s².
• Enjoy ultra-quiet operation at as low as 44dB in Quiet mode — print overnight without disturbing the household.
• Tackle a wide range of materials including PLA, PETG, TPU, ABS, and ASA with a 320°C capable hotend.
• Print with confidence thanks to AI Spaghetti Detection, filament runout sensing, and power loss recovery.

Serious 3D Printing, Without the Fuss

The Anycubic Kobra S1 is a fully enclosed CoreXY FDM 3D printer built for makers, hobbyists, and professionals who want fast, reliable results without constantly babysitting their machine. Powered by Kobra OS and packed with smart automation features, it brings high-speed printing, broad material compatibility, and intelligent print monitoring together in a single, capable package.

Speed and Precision Locked In by CoreXY

Tired of watching slow, lumbering printers grind through complex models? The Kobra S1’s CoreXY construction, driven by linear rod motion on both X and Y axes and a single-motor three-pole Z-axis, delivers smooth, stable movement at a recommended 300 mm/s — with a maximum ceiling of 600 mm/s and up to 20,000 mm/s² acceleration. Pressure advance and flow calibration are built in, so what comes off the bed reflects what you designed, not what the printer could manage.

A Hotend That Handles What You Throw at It

With a maximum nozzle temperature of 320°C and a PEI spring steel heated bed reaching up to 120°C, the Kobra S1 supports a broad material roster — PLA, PETG, TPU, ABS, and ASA — without requiring an upgrade. The standard 0.4mm nozzle handles everyday printing, while compatibility with 0.6mm and 0.8mm nozzles gives you flexibility for faster, rougher or more detail-focused work. The source material notes the hotend is designed for easy disassembly and clog-free performance.

Smart Monitoring Keeps Your Prints Safe

The Kobra S1 watches over every job so you don’t have to. AI Spaghetti Detection spots failed prints early and can halt the job before filament becomes a tangled mess. Filament runout detection pauses the print and waits for you to reload, filament entanglement detection flags spool issues before they cause a failure, and power loss resume picks up exactly where it left off after an unexpected outage. A built-in HD camera supporting 480P video monitoring means you can check in remotely via the Anycubic APP over Wi-Fi. LeviQ3.0 auto-levelling and Z-Offset adjustment handle bed calibration automatically, and object-skip with area levelling adds further precision control.

Quiet, Connected, and Easy to Control

At as low as 44dB in Quiet mode, the Kobra S1 is considerate of its surroundings — a real advantage when printing long overnight jobs. The 4.3-inch capacitive touchscreen gives you direct, responsive control on the printer itself, while slicing software, the Anycubic APP, and USB connectivity round out your options. The interface supports nine languages, making it accessible whether you’re setting it up for the first time or handing it to a colleague.

Features

• Fully enclosed CoreXY construction with a 250×250×250mm build volume for large, dimensionally accurate prints.
• Recommended print speed of 300 mm/s and maximum of 600 mm/s, with acceleration up to 20,000 mm/s².
• 320°C maximum nozzle temperature supports PLA, PETG, TPU, ABS, and ASA filaments.
• Standard 0.4mm nozzle, expandable to 0.6mm or 0.8mm for versatile output options.
• PEI spring steel heated bed reaches up to 120°C for reliable adhesion across material types.
• LeviQ3.0 auto-levelling with Z-Offset and object-skip area levelling for consistent first layers.
• AI Spaghetti Detection, filament runout detection, filament entanglement detection, and power loss resume for worry-free printing.
• Built-in HD camera (480P) for remote monitoring via the Anycubic APP over Wi-Fi.
• Ultra-quiet operation at ≤44dB in Quiet mode and ≤46dB in Standard mode.
• 4.3-inch capacitive touchscreen with nine-language support; controllable via printer, slicing software, Anycubic APP, or USB.

Specifications

• Printer Technology: FDM (Fused Deposition Modeling)
• Printing Volume: 250*250*250mm³
• Max Printing Speed: Recommended 300 mm/s; Maximum 600 mm/s
• Acceleration: Recommended 10,000 mm/s²; Maximum 20,000 mm/s²
• Multicolor Printing: Sold separately
• Supporting Filaments: PLA, PETG, TPU, ABS, ASA
• Active Drying: Not Supported
• Nozzle Diameter: Standard 0.4 mm, expandable to 0.6 / 0.8 mm
• Max Nozzle Temperature: 320°C
• Hotbed Max Temperature: 120°C
• Hotbed Material: PEI spring steel build plate
• Firmware: Kobra OS
• Construction: CoreXY
• Extrusion Type: Short distance extrusion
• Motion System X-axis: Linear rods
• Motion System Y-axis: Linear rods
• Motion System Z-axis: Single motor with three guide poles
• Auto-Leveling: LeviQ3.0 Auto-leveling, Z-Offset
• Pressure Advance / Flow Calibration: true
• Power Loss Resume: true
• Filament Detection and Auto Resume: true
• Filament Entanglement Detection: true
• AI Spaghetti Detection: true
• Object-Skip and Area Leveling: true
• Control and Print Methods: Via printer, Slicing software, Anycubic APP, USB (print only)
• Touchscreen: 4.3-” capacitive touchscreen
• Noise Level: ≤46dB (Standard mode); ≤44dB (Quiet mode)
• Video Monitoring: Standard HD camera, supports 480P
• Multilingual Support: EN / CN / DE / FR / IT / ES / RU / JP / KO
• Connectivity: USB, Wi-Fi, Anycubic APP
• Machine Dimensions: 40 x 41 x 49 cm³
• Machine Weight: 9370g
• Warranty: 12 Months

What’s in the Box

• Anycubic Kobra S1 Filament 3D Printer x1
• Spool Holder x1
• Screws M3×6 x2
• U-Disk x1
• Power Cord x1
• Hex Keys 2.5mm / 2.0mm / 1.5mm x1 set
• Filament Sample x1
• Activated Carbon x1
• Nozzle Cleaning Module x1
• Nozzle Silicone Part x1
• Nozzle Cleaner x1
• Grease x1

See Manufacturers site or Check out more from Chaos

The post Anycubic Kobra S1 Filament 3D Printer appeared first on Chaos Computers.

Quick Specs

• Print ambitious creations with a massive 420 mm × 420 mm × 500 mm build volume — room for truly large-scale single-piece prints
• Achieve faster results with print speeds of up to 600 mm/s, cutting waiting time without sacrificing quality
• Enjoy reliable first-layer adhesion every time thanks to precise auto-levelling and a PEI magnetic spring hotbed
• Stay in control from anywhere — manage prints via the Anycubic App, AC Cloud, or Anycubic Slicer Next over Wi-Fi
• Print with confidence knowing power-loss resume and filament runout detection protect your long prints from interruption

Scale Up Your 3D Printing

The Anycubic Kobra 3 Max is a large-format FDM 3D printer built for makers, designers, and hobbyists who are ready to stop thinking small. With a 420 mm × 420 mm × 500 mm build volume, it lets you produce genuinely large prints in a single run — from cosplay props and architectural models to functional prototypes and statement display pieces. Pair that with print speeds of up to 600 mm/s and you have a machine that matches ambition with efficiency.

A Bed You Can Trust, Every Single Print

Tired of spending more time levelling your bed than actually printing? The Kobra 3 Max takes that frustration away with its precise auto-levelling system, which probes the hotbed automatically and compensates for any surface variation before each print begins. The PEI magnetic spring board provides reliable adhesion during printing and releases finished parts cleanly once cooled, so you spend less time fussing and more time making.

Intelligent Protection for Long Runs

Long prints on a large machine deserve long-print protection. The Kobra 3 Max includes both power-loss resume and filament runout detection with auto resume. If the power cuts unexpectedly, the printer picks up exactly where it left off when you turn it back on. If your filament spool runs dry mid-print, it alerts you to reload and then continues — keeping hours of print time from going to waste.

Connect, Slice, and Print Your Way

The Kobra 3 Max gives you multiple ways to work. Slice models in Anycubic Slicer or Orca Slicer, send files via USB drive or over Wi-Fi through AC Cloud and Anycubic Slicer Next, and monitor and control print jobs remotely from your phone using the Anycubic App. The onboard touchscreen handles quick adjustments right at the machine, and a dedicated port for cameras and other peripherals is available for expanded monitoring. Supported filaments include PLA, TPU, PETG, and ABS, giving you genuine material flexibility within a single machine.

Features

• Large 420 mm × 420 mm × 500 mm build volume for oversized single-piece prints
• FDM printing technology with a single 0.4 mm nozzle and layer thickness range of 0.08–0.28 mm
• Print speeds up to 600 mm/s for faster turnaround on large projects
• Precise auto-levelling system for consistent first-layer adhesion without manual adjustment
• PEI magnetic spring hotbed for reliable adhesion during printing and easy part removal after cooling
• Power-loss resume automatically continues a print after an unexpected power cut
• Filament runout detection with auto resume prevents failed prints due to empty spools
• Wi-Fi connectivity (2.4 GHz) with support for AC Cloud, Anycubic App, Anycubic Slicer Next, and USB drive printing
• Compatible with PLA, TPU, PETG, and ABS filaments
• Touchscreen control panel with multilingual support
• Camera and peripherals port available for optional video monitoring
• Dual metal spindles on Y-axis and lead screws on Z-axis for stable, accurate motion

Specifications

• Printer Technology: FDM (Fused Deposition Modelling)
• Printing Volume: 420 mm (L) × 420 mm (W) × 500 mm (H)
• Print Layer Thickness: 0.08 – 0.28 mm
• Max Printing Speed: Up to 600 mm/s
• Supporting Filaments: PLA, TPU, PETG, ABS
• Nozzle Diameter: 0.4 mm
• Hotbed Material: PEI magnetic spring board
• Extrusion Type: Single
• Motion System Y-axis: Double metal spindles
• Motion System Z-axis: Lead screws
• Auto-Leveling: Auto-Level (Precise Auto-Leveling)
• Power Loss Resume: true
• Filament Detection and Auto Resume: true
• Control and Print Methods: Touchscreen, Anycubic App, Anycubic Slicer Next, U-Disk, AC Cloud
• Touchscreen: Yes (Touchscreen)
• Video Monitoring: Yes (Cameras and Other Peripherals port available)
• Multilingual Support: Yes
• Slicer Software: Anycubic Slicer, Orca Slicer
• Input File Formats: .STL,.OBJ,.3mf
• Output File Formats: G-code
• Connectivity: U-DISK, AC Cloud, Anycubic Slicer Next, Wi-Fi
• Wi-Fi Spec: 2.4G (2.400-2.4835GHz); Working Mode: AP, STA, AP+STA
• Machine Dimensions: 706 mm (L) × 640 mm (W) × 753 mm (H)
• Machine Weight: ~18 KG
• Power Input: 110 V / 220 V AC
• Rated Power: 1100 W
• Warranty: 12 Months

What’s in the Box

• Anycubic Kobra 3 Max Printer Frame x1
• Base Housing x1
• Printhead x1
• Touchscreen x1
• Spool Holder x1
• Cable Holder x1
• Support Rod x1
• Bag No.1 (Frame screws) x1
• Bag No.2 (Support Rod screws) x1
• Bag No.3 (Printhead Cable screws) x1
• Bag No.4 (Printhead screws) x1
• Bag No.5 (Touchscreen screws) x1
• Bag No.6 (Spool Holder screws) x1
• U Disk x1
• Power Cord x1
• Cable Organiser x5
• Filament Tube x1
• Allen Keys (6.0 / 4.0 / 3.0 / 2.5 / 2.0 / 1.5 mm) x1 set
• Wrench x1
• Nozzle Cleaner x1
• Filament (sample) x1
• Grease x1
• User Manual x1

Why Anycubic

Anycubic has been at the forefront of accessible 3D printing technology since 2015, driven by the belief that the freedom to make should belong to everyone. From compact desktop printers to large-format machines like the Kobra 3 Max, every product is designed to lower the barrier between an idea and a finished object — backed by a global support network and a community of millions of makers.

See Manufacturers site or Check out more from Chaos

The post Anycubic Kobra 3 Max 3D Printer appeared first on Chaos Computers.