Specifications

CPU

– LGA1700 socket: Support for the 13th and 12th Generation Intel® Core™, Pentium® Gold and Celeron® Processors
– L3 cache varies with CPU

Chipset

– Intel® Z790 Express Chipset

Memory

– Support for DDR4 5333(O.C.)/ DDR4 5133(O.C.)/DDR4 5000(O.C.)/4933(O.C.)/4800(O.C.)/ 4700(O.C.)/ 4600(O.C.)/ 4500(O.C.)/ 4400(O.C.)/ 4300(O.C.)/4266(O.C.) / 4133(O.C.) / 4000(O.C.) / 3866(O.C.) / 3800(O.C.) / 3733(O.C.) / 3666(O.C.) / 3600(O.C.) / 3466(O.C.) / 3400(O.C.) / 3333(O.C.) / 3300(O.C.) / 3200 / 3000 / 2933 / 2800 / 2666 / 2400 / 2133 MHz memory modules
– 4 x DDR DIMM sockets supporting up to 128 GB (32 GB single DIMM capacity) of system memory
– Dual channel memory architecture
– Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode)
– Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules
– Support for Extreme Memory Profile (XMP) memory modules

Onboard Graphics

– Integrated Graphics Processor-Intel® HD Graphics support:
– 1 x HDMI port, supporting a maximum resolution of 4096×2160@60 Hz * Support for HDMI 2.0 version and HDCP 2.3.
– 1 x DisplayPort, supporting a maximum resolution of 4096×2304@60 Hz * Support for DisplayPort 1.2 version and HDCP 2.3
– (Graphics specifications may vary depending on CPU support.)

Audio

– Realtek® Audio CODEC
– High Definition Audio
– 2/4/5.1/7.1-channel * You can change the functionality of an audio jack using the audio software. To configure 7.1-channel audio, access the audio software for audio settings.
– Support for S/PDIF Out

LAN

– Realtek® 2.5GbE LAN chip (2.5 Gbps/1 Gbps/100 Mbps)

Expansion Slots

– CPU:
– 1 x PCI Express x16 slot, supporting PCIe 5.0 and running at x16 (PCIEX16) * For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot.

– Chipset:
– 1 x PCI Express x16 slot, supporting PCIe 4.0 and running at x4 (PCIEX4)
– 1 x PCI Express x16 slot, supporting PCIe 3.0 and running at x1 (PCIEX1_4)
– 2 x PCI Express x1 slots, supporting PCIe 3.0 and running at x1 (PCIEX1_2, PCIEX1_3)
– Support for AMD CrossFire™ technology (PCIEX16 and PCIEX4)

Storage Interface

– CPU:
– 1 x M.2 connector (Socket 3, M key, type 22110/2280 PCIe 4.0 x4/x2 SSD support) (M2A_CPU)

– Chipset:
– 2 x M.2 connectors (Socket 3, M key, type 2280 PCIe 4.0 x4/x2 SSD support) (M2Q_SB, M2P_SB)
– 6 x SATA 6Gb/s connectors
– RAID 0, RAID 1, RAID 5, and RAID 10 support for NVMe SSD storage devices
– RAID 0, RAID 1, RAID 5, and RAID 10 support for SATA storage devices

USB

– Chipset:
– 1 x USB Type-C® port on the back panel, with USB 3.2 Gen 2×2 support
– 1 x USB Type-C® port with USB 3.2 Gen 1 support, available through the internal USB header
– 1 x USB 3.2 Gen 2 Type-A port (red) on the back panel
– 6 x USB 3.2 Gen 1 ports (4 ports on the back panel, 2 ports available through the internal USB header)

– Chipset+1 USB 2.0 Hub:
– 6 x USB 2.0/1.1 ports (2 ports on the back panel, 4 ports available through the internal USB headers)

Internal I/O Connectors

– 1 x 24-pin ATX main power connector
– 1 x 8-pin ATX 12V power connector
– 1 x 4-pin ATX 12V power connector
– 1 x CPU fan header
– 1 x water cooling CPU fan header
– 3 x system fan headers
– 1 x system fan/water cooling pump header
– 2 x addressable LED strip headers
– 2 x RGB LED strip headers
– 3 x M.2 Socket 3 connectors
– 6 x SATA 6Gb/s connectors
– 1 x front panel header
– 1 x front panel audio header
– 1 x S/PDIF Out header
– 1 x USB Type-C® header, with USB 3.2 Gen 1 support
– 1 x USB 3.2 Gen 1 header
– 2 x USB 2.0/1.1 headers
– 1 x serial port header
– 2 x Thunderbolt™ add-in card connectors
– 1 x Trusted Platform Module header (For the GC-TPM2.0 SPI/GC-TPM2.0 SPI 2.0 module only)
– 1 x reset button
– 1 x Q-Flash Plus button
– 1 x reset jumper
– 1 x Clear CMOS jumper

Back Panel Connectors

– 1 x USB Type-C® port, with USB 3.2 Gen 2×2 support
– 1 x USB 3.2 Gen 2 Type-A port (red)
– 4 x USB 3.2 Gen 1 ports
– 2 x USB 2.0/1.1 ports
– 1 x HDMI 2.0 port
– 1 x RJ-45 port
– 3 x audio jacks

I/O Controller

– iTE® I/O Controller Chip

H/W Monitoring

– Voltage detection
– Temperature detection
– Fan speed detection
– Water cooling flow rate detection
– Fan fail warning
– Fan speed control * Whether the fan (pump) speed control function is supported will depend on the fan (pump) you install.

BIOS

– 1 x 256 Mbit flash
– Use of licensed AMI UEFI BIOS
– PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0

Unique Features

– Support for GIGABYTE Control Center (GCC) * Available applications in GCC may vary by motherboard model. Supported functions of each application may also vary depending on motherboard specifications.
– Support for Q-Flash
– Support for Q-Flash Plus
– Support for Smart Backup

Operating System

– Support for Windows 11 64-bit
– Support for Windows 10 64-bit

Form Factor

– ATX Form Factor; 30.5cm x 24.4cm