| Brand |
Gigabyte |
| Series |
Gaming Motherboards |
| Model |
B650I AORUS ULTRA |
| CPU |
AMD Socket AM5, support for: AMD Ryzen 7000 Series Processors |
| (Please refer “CPU Support List” for more information.) |
| Chipset |
AMD B650 |
| Memory |
Support for DDR5 6400(OC) / 6200(OC) / 6000(OC) / 5600(OC) / 5200 / 4800 / 4400 MT/s memory modules |
| 2 x DDR5 DIMM sockets supporting up to 64 GB (32 GB single DIMM capacity) of system memory |
| Dual channel memory architecture |
| Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules |
| Support for AMD EXtended Profiles for Overclocking (AMD EXPO) and Extreme Memory Profile (XMP) memory modules |
| (Please refer “Memory Support List” for more information.) |
| Onboard Graphics |
Integrated Graphics Processor: |
| 1 x DisplayPort, supporting a maximum resolution of 3840×2160@144 Hz |
| * Support for DisplayPort 1.4 version and HDR. |
| 1 x USB Type-C port, supporting USB 3.2 Gen 2 and DisplayPort video outputs and a maximum resolution of 3840×2160@144 Hz |
| * Support for DisplayPort 1.4 version and HDR. |
| 1 x HDMI port, supporting a maximum resolution of 7680×4320@60 Hz |
| * Support for HDMI 2.1 version and HDCP 2.3. |
| ** Support native HDMI 2.1 TMDS compatible ports. |
| (Graphics specifications may vary depending on CPU support.) |
| Audio |
Realtek ALC4080 CODEC |
| High Definition Audio |
| 2-channel |
| LAN |
Intel 2.5GbE LAN chip (2.5 Gbps/1 Gbps/100 Mbps) |
| Wireless Communication Module |
AMD Wi-Fi 6E RZ616 (MT7922A22M) |
| WIFI a, b, g, n, ac, ax, supporting 2.4/5/6 GHz carrier frequency bands |
| BLUETOOTH 5.2 |
| Support for 11ax 160MHz wireless standard and up to 2.4 Gbps data rate |
| (Actual data rate may vary depending on environment and equipment.) |
| Storage Interface |
CPU: |
| 1 x M.2 connector on the front of GC-B650I BTB PLUG (Socket 3, M key, type 2280 PCIe 5.0* x4/x2 SSD support) (M2B_CPU) |
| * Actual support may vary by CPU. |
| 1 x M.2 connector on the back of GC-B650I BTB PLUG (Socket 3, M key, type 2280/2260 PCIe 4.0 x4/x2 SSD support) (M2A_CPU) |
| Chipset: |
| 1 x M.2 connector on the back of the motherboard (Socket 3, M key, type 2280 PCIe 4.0 x4/x2 SSD support) (M2C_SB) |
| 4 x SATA 6Gb/s connectors on the front of GC-B650I FRONT CARD |
| RAID 0, RAID 1, and RAID 10 support for NVMe SSD storage devices |
| RAID 0, RAID 1, and RAID 10 support for SATA storage devices |
| USB |
CPU: |
| 1 x USB Type-C port on the back panel, with USB 3.2 Gen 2 support |
| 2 x USB 3.2 Gen 2 Type-A ports (red) on the back panel |
| CPU USB 2.0 Hub: |
| 4 x USB 2.0/1.1 ports available through the F_USB header on the front of GC-B650I BTB PLUG |
| Chipset: |
| 1 x USB Type-C port with USB 3.2 Gen 2×2 support, available through the internal USB header |
| 4 x USB 3.2 Gen 1 ports (2 ports on the back panel, 2 ports available through the internal USB header) |
| 2 x USB 2.0/1.1 ports on the back panel |
| Internal I/O Connectors |
1 x 24-pin ATX main power connector |
| 1 x 8-pin ATX 12V power connector |
| 1 x CPU fan header |
| 1 x CPU fan/water cooling pump header |
| 1 x system fan header (SYS_FAN1(Note 1)) |
| 1 x addressable LED strip header(Note 2) |
| 1 x RGB LED strip header(Note 1) |
| 3 x M.2 Socket 3 connectors (M2B_CPU(Note 2)/M2A_CPU(Note 3)/M2C_SB(Note 4)) |
| 4 x SATA 6Gb/s connectors(Note 1) |
| 1 x front panel header(Note 1) |
| 1 x front panel audio header (routed from the adapter card on the rear panel) |
| 1 x USB Type-C header, with USB 3.2 Gen 2×2 support |
| 1 x USB 3.2 Gen 1 header |
| 1 x USB 2.0/1.1 header(Note 2) |
| 1 x reset button(Note 2) |
| 1 x reset jumper |
| 1 x power switch jumper |
| 1 x Clear CMOS jumper |
| (Note 1) The connector is on the front of GC-B650I FRONT CARD. |
| (Note 2) The connector is on the front of GC-B650I BTB PLUG. |
| (Note 3) The connector is on the back of GC-B650I BTB PLUG. |
| (Note 4) The connector is on the back of the motherboard. |
| Back Panel Connectors |
1 x DisplayPort |
| 1 x HDMI port |
| 1 x USB Type-C port (DisplayPort), with USB 3.2 Gen 2 support |
| 2 x USB 3.2 Gen 2 Type-A ports (red) |
| 2 x USB 3.2 Gen 1 ports |
| 2 x USB 2.0/1.1 ports |
| 1 x RJ-45 port |
| 2 x SMA antenna connectors (2T2R) |
| 1 x Q-Flash Plus button |
| 2 x audio jacks |
| I/O Controller |
ITE I/O Controller Chip |
| H/W Monitoring |
Voltage detection |
| Temperature detection |
A valid RSA ID document
